28 Chapter 4—Getting Around the User Interface
About the User Interface
Thanks to a user-friendly interface, 01V operation is both logical and intuitive. The 320 x 80 dot LCD display provides clear indication of mix settings and operating status, while dedicated SELECTED CHANNEL controls allow for quick EQ and pan adjust- ments. Operation of the multifunction faders depends on the selected Fader mode. Mixing functions and configuration settings are organized into display pages, with up to five related pages being grouped together. For example, the MIDI Setup and Program Change pages are grouped together under MIDI. Parameter selection and editing is carried out using the [CURSOR], [ENTER], [–1/DEC] and [+1/INC] buttons, and PARAMETER wheel, which is detented for precise and accurate editing.
Display
The 320 x 80 dot LCD display provides clear indication of mix settings and operating status. As well as showing parameter values numerically, faders and rotary controls are represented graphically, so you can actually see pan and fader positions. The display also shows EQ curves and signal level meters. The various sections of the display are explained below.
Page area
Function
Memory
Effects
Returns
Selected channel
Function—This area of the display shows the name of the function selected using the Function and Fader mode buttons. Functions are divided into pages, which are identified by numbered tabs, as shown here. In this example, page 1 of the VIEW function is selected. The following functions can be selected.
Function Buttons | Fader Mode Buttons |
| |
UTILITY | EFFECT 1 |
| |
MIDI | EFFECT 2 |
| |
SETUP | OPTION I/O |
| |
VIEW | REMOTE |
| |
DYNAMICS | AUX 1 |
| |
EQ/ATT | AUX 2 |
| |
ø/DELAY | AUX 3 |
| |
PAN/ROUTING | AUX 4 |
| |
MEMORY | HOME |
| |
