Using the Dynamics Processors 165

4.Use the cursor buttons to select the parameters, and the PARAMETER wheel or [–1/DEC] and [+1/INC] buttons to set them.

When aux sends are paired (“Making Aux Send Pairs” on page 101), their dynamics processors are linked.

For the Stereo Output

1.Press the [HOME] button, and then the MASTER [SEL] button.

ST appears on the display, indicating that the stereo output is selected.

2.Use the [DYNAMICS] button to locate DYNAMICS page 1, as shown below.

3.Press the [ENTER] button to turn on the dynamics processor.

The ON/OFF switch appears highlighted when the dynamics processor is on. While DYNAMICS page 1 is displayed, the [ENTER] button turns the dynamics processor on or off regardless of the cursor position.

4.Use the cursor buttons to select the parameters, and the PARAMETER wheel or [–1/DEC] and [+1/INC] buttons to set them.

01V—Owner’s Manual