218 Chapter 16—Using the Digital Inputs & Outputs

Installing Option I/O Cards

Warning: Turn off the 01V before installing an Option I/O card. Failure to do so is an electrical shock hazard and may cause serious damage.

1.Turn off the 01V.

2.Undo the two fixing screws and remove the slot cover, as shown below.

Keep the cover in a safe place for future use.

3.Insert the card into the slot as shown below. Push it in all the way so that the card’s connector mates correctly with the internal 01V connector.

4.Secure the card using the two fixing screws. Do not leave the screws loose, as the card will not be grounded correctly.

5.Turn on the 01V.

The 01V checks to see what type of Option I/O card is installed when it’s turned on. If installation is successful, the type of card installed is displayed on OPTION page 1, as shown below.

01V—Owner’s Manual