GRAPHIC USER INTERFACE (GUI) SCREEN
■I/O Assignment
(Input/output assignment)
Use this feature to assign the input/output jacks according to the component to be used if the initial settings of this unit do not correspond to your needs. Change the following parameters to reassign the respective jacks and effectively connect more components.
Once the input/output jacks are reassigned, you can select the corresponding component by using the INPUT selector on the front panel (or the input selector buttons on the remote control).
Optical Output
Component Video
I/O Assignment | HDMI |
Audio Select
Decoder Mode
Example 1: Assigning the COAXIAL 1 CD jack to the DVD input.
1Select “Input Select” in the GUI screen and then select “DVD”.
2Select “I/O Assignment” and then “Coaxial Input”.
3Select “1 CD”.
Example 2: Clearing a jack assignment.
1Select “Input Select” and then select the desired input source (“DVD”, etc.).
2Select “I/O Assignment” and then select the desired jack assignment (“Coaxial Input”, “Optical Input”, “Optical Output”, “Component Video”, or “HDMI”).
3Select “None” and then press ENTER to clear the assignment.
Notes
•You cannot select a specific item more than once for the same type of jack.
•When you connect a component to both the COAXIAL and OPTICAL jacks, priority is given to signals input at the COAXIAL jack.
■Audio Select (Audio input jack select)
This unit comes with a variety of input jacks. You can select the type of input signal you want to use. Choices: Auto, HDMI, Coax/Opt, Analog
I/O Assignment |
|
Audio Select | Auto |
Decoder Mode | HDMI |
Volume Trim | Coax/Opt |
•Select “Auto” when you want signals to be input to this unit in the following order: HDMI signals, digital signals and analog signals.
•Select “HDMI” when you only want HDMI signals to be input to this unit. If no HDMI signals are input, no sound is output.
•Select “Coax/Opt” when you want digital signals to be input to this unit at the OPTICAL or COAXIAL jacks. Use if HDMI signals are also being input.
•Select “Analog” when you only want analog signals to be input to this unit. If no analog signals are input, no sound is output.
y
•You can also select the audio input jack by pressing AUDIO SELECT on the front panel (or AUDIO SEL on the remote control). See page 42 for details.
•You can set the default Audio input jack select of this unit by using “Audio Select” in “Option” (see page 114).
Note
This feature is not available when no digital input jack (OPTICAL, COAXIAL and HDMI) are assigned. In addition, “HDMI” is not available as an Audio input jack select setting when the HDMI IN 1, HDMI IN 2 and HDMI IN 3 jacks are not used. Use “I/O Assignment” in “Input Select” to reassign the respective input jack (see page 96).
■Decoder Mode (Decoder mode)
Use this feature to switch the input mode. You can designate the reassigned digital input jacks (see page 96) for specific audio signals (DTS, etc.).
Choices: Auto, DTS
I/O Assignment |
|
Audio Select |
|
Decoder Mode | Auto |
Volume Trim | DTS |
Rename |
|
•Select “Auto” if you want this unit to automatically detect input signal types and select the appropriate input mode.
•Select “DTS” if you want this unit to select DTS as the input mode.