CONNECTIONS
Connecting a TV monitor or projectorConnect your TV (or projector) to the HDMI OUT jack, the COMPONENT VIDEO MONITOR OUT jacks, the S VIDEO MONITOR OUT jack or the VIDEO MONITOR OUT jack of this unit.
CAUTION
Do not connect this unit or other components to the AC power supply until all connections between components are complete.
y
You can select to play back HDMI audio signals on this unit or on another HDMI component connected to the HDMI OUT jack on the rear panel of this unit. Use the “Support Audio” parameter in “Option” to select the component to play back HDMI audio signals (see page 115).
Notes
•Some video monitors connected to this unit via a DVI connection fail to recognize the HDMI audio/video signals being input if they are in the standby mode. In this case, the HDMI indicator flashes irregularly.
•Set “Conversion” in “Video” to “On” (see page 102) to display the short message displays.
•Set “Wall Paper” in “Video” to “Yes” or “Gray” (see page 104) to display the parameter displays.
•The GUI screen appears with the wall paper or gray background depending on the input video signal format and the setting of the parameters in “Wall Paper” (see page 104).
| COMPONENTVIDEO |
MONITOR OUT | MONITOR OUT |
Y |
|
| SVIDEO |
PB |
|
| VIDEO |
HDMI
PR
OUT
(U.S.A. model)
Y | PB | PR | V | S |
|
Component video in |
| Video in |
HDMI in |
| |
| ||
|
|
|
| TV | |
| (or projector) | |
PREPARATION
indicates recommended connections
indicates alternative connections