GRAPHIC USER INTERFACE (GUI) SCREEN
■Position (GUI screen position)
Use this feature to adjust the vertical and horizontal position of the GUI screen.
Control range:
Short Message | |
On Screen |
|
Position | + |
Wall Paper |
|
•Press k to raise the position of the GUI display.
•Press n to lower the position of the GUI display.
•Press h to shift the position of the GUI display to the right.
•Press lto shift the position of the GUI display to the left.
■Wall Paper (Wall paper)
Use this feature to display the wall paper or gray background in your video monitor when there is no video signal being input.
Choices: None, Yes, Gray
On Screen |
|
Position | None |
Wall Paper | Yes |
| Gray |
•Select “None” not to display any background in your video monitor.
•Select “Yes” to display a background image (the photograph of a piano) in your monitor when there is no video signal being input.
•Select “Gray” to display a gray background in your monitor when there is no video signal being input.
Note
When “Conversion” is set to “Off”, no background is displayed even if “Wall Paper” is set to “Yes”.
Use this menu to manually adjust any speaker setting.
1Set the operation mode selector to AMP and then press SET MENU on the remote control.
AMP |
|
| SET MENU |
SOURCE | MENU |
| |
TV | SRCH MODE |
|
2Press k / n on the remote control to select “Manual Setup” and then press h.
PRESET/CH | PRESET/CH |
ENTER | ENTER |
A/B/C/D/E | A/B/C/D/E |
3Press k / n / l / h on the remote control to select “Basic” and then press h.
PRESET/CH | PRESET/CH |
| |
ENTER | ENTER |
| |
A/B/C/D/E | A/B/C/D/E |
|
Sound |
|
Video | Test Tone |
Basic | Speaker Set |
NET/USB | Speaker Distance |
Option | Speaker Level |
4Select the desired parameters and then press h to access and adjust.
PRESET/CH
ENTER
A/B/C/D/E