9Repeat steps 7 and 8 until you set all the desired parameters.
Skip
Wiring
Check
Distance
Size
Wiring | Skip |
Distance | Check |
Size |
|
Equalizing |
|
Wiring |
|
Distance | Skip |
Size | Check |
Equalizing |
|
Level |
|
Distance |
|
Size | Skip |
Equalizing | Check: Natural |
Level | Check: Flat |
| Check: Front |
AUTO SETUP
Equalizing (Parametric equalizer level)
Adjusts the frequency and the parametric equalizer level of each channel to reduce coloration across the channels and create a cohesive sound field. This is particularly important if you use different brands or sizes of speakers for some channels or have a room with unique sonic characteristics. In addition, the frequency response of each channel is adjusted in accordance with the sound output from your front speakers.
Choices: Check:Natural, Check:Flat, Check:Front, Skip
•Select “Check:Natural” to average out the frequency response of all speakers with higher frequencies being less emphasized. Recommended if the “Check:Flat” setting sounds a little harsh.
•Select “Check:Flat” to average the frequency response of all speakers. Recommended if all of your speakers are of similar quality.
•Select “Check:Front” to adjust the frequency response of each speaker in accordance with the sound of your front speakers. Recommended if your front speakers are of much higher quality than your other speakers.
•Select “Skip” to skip the selected item and perform no adjustments.
PREPARATION
Size |
| Level (Volume level) | |
Equalizing | Skip | ||
Level | Check | Checks and adjusts the volume level of each speaker. | |
|
| Choices: Check, Skip | |
This unit performs the following checks: | • Select “Check” to automatically check and adjust | ||
this item. | |||
Wiring (Speaker wiring) | • Select “Skip” to skip this item and perform no | ||
adjustments. | |||
Checks which speakers are connected and the | |||
| |||
polarity of each speaker. |
|
| |
| 10 Once you have selected the desired settings | ||
|
| ||
Distance (Speaker distance) | of each parameter, press l to return to the | ||
Checks the distance of each speaker from the | previous menu level and then press n to | ||
listening position and adjusts the timing of each | select “Start”. | ||
channel. |
|
|
Size (Speaker size) | Information |
|
Checks the frequency response of each speaker and | Setup Menu |
|
sets the appropriate | Start | Start: ENTER |
channel. |
|
|
Choices: Check, Skip
•Select “Check” to automatically check and adjust the item.
•Select “Skip” to skip the item and perform no adjustments.