■Audio information

Format (Signal format)

Signal format. When this unit cannot detect a digital signal, it automatically switches to analog input.

Note

“---” appears when this unit cannot detect any signals.

Sampling (Sampling frequency)

The number of samples per second taken from a continuous signal to make a discrete signal.

Note

“---” appears when this unit cannot detect the sampling frequency.

Channel (Input channel)

The number of source channels in the input signal (front/surround/LFE). For example, a multi-channel soundtrack with 3 front channels, 2 surround channels and LFE, is displayed as “3/2/0.1”.

Note

“---” appears when there is no source channel available.

Bitrate (Bit rate)

The number of bits passing a given point per second.

Note

“---” appears when this unit cannot detect the bit rate.

Dialogue

(Dialogue normalization level)

The dialogue normalization level preset to the current input Dolby Digital and DTS signal.

Flag1/Flag2 (Signal flags)

Flag data encoded in DTS, Dolby Digital, or PCM signals that cue this unit to automatically switch decoders.

■Video information

HDMI Signal (HDMI signal type)

Type of the source video signals and the video signals output at the HDMI OUT jack of this unit.

HDMI Resolution (HDMI resolution)

Resolution of the source video signals and the video signals output at the HDMI IN jacks of this unit.

Analog Resolution (Analog resolution)

Resolution of the source video signals and the analog video signals output at the COMPONENT MONITOR OUT jacks of this unit.

HDMI Error (HDMI Error)

Error message for HDMI sources or connected HDMI devices. See page 144 for details.

GRAPHIC USER INTERFACE (GUI) SCREEN

Language

Use this feature to select the language of the menu items and messages that appears in the GUI (graphical user interface) screen of this unit.

Choices: English (English), (Japanese), Français (French), Deutsch (German), Español (Spanish), Русский (Russian)

y

You can also select the GUI language using the “GUI LANGUAGE” parameter in “ADVANCED SETUP” in the front panel display (see page 136).

1Set the operation mode selector to AMP and then press SET MENU on the remote control.

The top display appears.

AMP

 

 

SET MENU

SOURCE

MENU

 

TV

SRCH MODE

 

Stereo/Surround

Sound

Input Select

Video

Manual Setup

Basic

Auto Setup

NET/USB

System Memory

Option

2Press n on the remote control repeatedly to select Language and then press h.

System Memory

Signal Info.

Language English

Français

3Press k / n on the remote control repeatedly to select the language of your choice.

4Press ENTER to confirm your selection.

OPERATION

ADVANCED

 

 

117 En