GRAPHIC USER INTERFACE (GUI) SCREEN
■Speaker Distance (Speaker distance)
Use this feature to manually adjust the distance of each speaker and the delay applied to the respective channel. Ideally, each speaker should be the same distance from the main listening position. However, this is not possible in most home situations. Thus, a certain amount of delay must be applied to the sound from each speaker so that all sounds will arrive at the listening position at the same time.
Test Tone | Subwoofer |
Speaker Set | Unit |
Speaker Distance | Front L |
Speaker Level | Front R |
| Center |
Speaker distances
Control range: 0.30 to 24.00 m (1.0 to 80.0 ft) Initial setting:
Front L/Front R/Subwoofer/Presence L/ Presence R/Subwoofer: 3.00 m (10.0 ft) CENTER: 2.60 m (8.5 ft)
Surround L/Surround R/Surround Back L/ Surround Back R: 2.40 m (8.0 ft)
Control step: 0.1 m (0.5 ft)
•Select “Front L” to adjust the distance of the front left speaker.
•Select “Front R” to adjust the distance of the front right speaker.
•Select “Center” to adjust the distance of the center speaker.
•Select “Surround L” to adjust the distance of the surround left speaker.
•Select “Surround R” to adjust the distance of the surround right speaker.
•Select “Surround Back L” to adjust the distance of the surround back left speaker.
•Select “Surround Back R” to adjust the distance of the surround back right speaker.
•Select “Presence L” to adjust the distance of the presence left speaker.
•Select “Presence R” to adjust the distance of the presence right speaker.
•Select “Subwoofer” to adjust the distance of the subwoofer.
Notes
•You cannot adjust the distance of speakers set to “None” in Speaker Set.
•If you are only using one surround back speaker, connect it to the SURROUND BACK (SINGLE) jack, and adjust the distance in “Surround Back L”.
•“Center”, “Surround L”, “Surround R”, “Surround Back L”, “Surround Back R”, “Subwoofer”, “Presence L” and “Presence R” cannot be adjusted if “Center” (see page 105), “Surround” (see page 106), “Surround Back” (see page 106), “Bass Out” (see page 107) and “Presence” (see page 106) are set to “None” respectively.
•Instead of “Surround Back L” and “Surround Back R”, “Surround Back” is displayed if “Surround Back” is set to either “Small x1” or “Large x1” (see page 106).
Unit (Unit)
Selects the unit for displaying the values of “Speaker Distance” parameter.
Choices: Meter (m), Feet (ft)
Initial setting:Feet (U.S.A. and Canada models) Meter (Other models)
Presence R |
|
Subwoofer |
|
Unit | Meter |
Front L | Feet |
Front R |
|
•Select “Meter” to input speaker distances in meters.
•Select “Feet” to input speaker distances in feet.