Yamaha 376, RX-V2700, Stereo Receiver USING MULTI-ZONECONFIGURATION, 130 En, Connecting the Zone 2 and Zone 3 components, ■Using external amplifiers

USING MULTI-ZONE CONFIGURATION

This unit allows you to configure a multi-room audio/video system. The multi-zone configuration feature enables you to set this unit to reproduce separate input sources in the main room, second room (Zone 2) and third room (Zone 3). You can control this unit from the second or third room using the supplied remote control.

Only analog signals are sent to the second and third rooms. Any source you want to listen to in the second or third room must be connected using the analog (AUDIO L/R) input jacks on this unit.

Connecting the Zone 2 and Zone 3 components

You need the following additional equipment to use the multi-room functions of this unit:

•An infrared signal receiver in the second and/or third room.

•An infrared emitter in the main room. This emitter transmits the infrared signals from the remote control in the second and/or third room to the main room (to a CD player or DVD player, for example).

•An amplifier and speakers for the second and/or third room.

•A video monitor for the second room

y

•You do not need an extra amplifier and speakers for the second and/or third room if you want to use the internal amplifiers of this unit.

•Since there are many possible ways to connect and use this unit in a multi-room configuration, we recommend that you consult with your nearest authorized YAMAHA dealer or service center for the Zone 2 and Zone 3 connections that best meet your requirements.

REMOTE		REMOTE			REMOTE			REMOTE
IN		OUT	IN		OUT	IN		OUT
Infrared signal	This unit			YAMAHA			YAMAHA
receiver				component			component

■Using external amplifiers

To use an external amplifier in Zone 2 or Zone 3, connect the external amplifier to ZONE OUT terminals and select “EXT” in “Zone2 Amplifier” or “Zone3 Amplifier” (see page 113).

		ZONE 3 AUDIO OUT
		ZONE 2 VIDEO OUT
		ZONE 2 AUDIO OUT
		SP OUT
		Amplifier	Amplifier
	MONITOR OUT
DVD player	This unit	Remote control	Remote control
(or other component)
		MAIN
	SYSTEM ZONE 3
	VIDEO IN	ZONE 2
	AUDIO IN	Infrared signal	Infrared signal
		receiver	receiver
Infrared emitter
	Main room	Second room	Third room
	(Main zone)	(Zone 2)	(Zone 3)
REMOTE OUT		REMOTE IN
			REMOTE IN

Notes

•Adjust the Zone 2/Zone 3 volume by using the amplifier in the second/third room when “Zone2 Volume” or “Zone3 Volume” are set to “Fixed” (see page 113).

•To avoid unexpected noise, DO NOT use the Zone 2/Zone 3 feature with CDs encoded in DTS.

130 En