Notes
•This menu item is not available and hence not visible in the GUI menu if “Conversion” is set to “Off” (see page 102).
•When you set “TV FORMAT” in “ADVANCED SETUP” to “NTSC” (see page 136), “480p” appears in the choices of “HDMI
■HDMI Aspect (HDMI aspect ratio)
Use this feature to select the adjustment of aspect ratio for HDMI video signal sources.
Choices: Through, 16:9 Normal, Smart Zoom
Component I/P |
|
HDMI |
|
HDMI Aspect | Through |
Short Message | 16:9 Normal |
On Screen | Smart Zoom |
•Select “Through” if you do not make any adjustments to the aspect ratio for HDMI video signal sources.
•Select “16:9 Normal” to display video images with 4:3 of aspect ratio on your video monitor with 16:9 of aspect ratio. Black stripes appear on the right and left sides as a result.
•Select “Smart Zoom” to fit video images with 4:3 of aspect ratio to your video monitor with 16:9 of aspect ratio.
Notes
•When “HDMI
•When “HDMI Aspect” is set to “Smart Zoom”, the video images of the edge of the video monitor are rather stretched.
•When the video signals are input at HDMI IN jacks or the signals are input with 720p or 1080i of resolution, the setting of “HDMI Aspect” does not affect the video signals output at the HDMI OUT jack.
GRAPHIC USER INTERFACE (GUI) SCREEN
■Short Message (Short message display)
Use this feature to activate or deactivate the short message display function.
Choices: Off, On
HDMI |
|
HDMI Aspect | Off |
Short Message | On |
On Screen
Position
•Select “On” to activate the short message display function. The contents of the front panel display appear at the bottom of the screen each time you operate this unit.
•Select “Off” to deactivate the short message display function.
Note
The short message display does not appear in the following cases:
–when the component video signals with 720p, 1080i or 1080p resolutions are input
–When HDMI video signals are input
■On Screen (On-screen display time)
Use this feature to set the amount of time to display the XM Satellite Radio information, iPod or NET/USB menu on the video monitor after you perform a certain operation.
Choices: Always, 10sec, 30sec
HDMI Aspect | Always |
Short Message | 10sec |
On Screen | 30sec |
Position |
|
Wall Paper |
|
•Select “Always” to display the menu screen unceasingly during an operation.
•Select “10sec” to turn off the menu screen 10 seconds after you perform a certain operation.
•Select “30sec” to turn off the menu screen 30 seconds after you perform a certain operation.
OPERATION | ADVANCED |
|
|