Bass Out (Bass out)

Use this feature to select the speakers that output the LFE (low-frequency effect) and the low-frequency signals. Choices: Both, SWFR, Front

Surround Back

 

Presence

 

Bass Out

Both

Bass Cross Over

SWFR

SWFR Phase

Front

GRAPHIC USER INTERFACE (GUI) SCREEN

SWFR Phase (Subwoofer Phase)

Use this feature to switch the phase of your subwoofer if bass sounds are lacking or unclear.

Choices: Normal, Reverse

Bass Out

 

Bass Cross Over

 

SWFR Phase

Normal

PR/SB Priority

Reverse

Notes

•Select “Both” (both) if you connected a subwoofer. The low-frequency signals of any source are output from the subwoofer. The LFE signals as well as the low-frequency signals of other speakers set to “Small” are directed to the subwoofer. The low-frequency signals of the front left and right channels are directed to the front left and right speakers and the subwoofer regardless of the “Front” setting (see page 107).

•Select “SWFR” (subwoofer) if you connected a subwoofer. The LFE signals as well as the low- frequency signals of other speakers set to “Small” are directed to the subwoofer.

•Select “Front” (front) if you did not connect a subwoofer. The LFE signals, the low-frequency signals of the front left and right channels, and the low- frequency signals of other speakers set to “Small” are all directed to the front left and right speakers regardless of the “Front” setting (see page 107).

Bass Cross Over (Bass cross over)

Use this feature to select the crossover frequency of all the speakers set to “Small” or to “None” in “Speaker Set” (see pages 105 and 106). All frequencies below the selected frequency will be sent to the subwoofer or to the speakers set to “Large” in “Speaker Set” (see pages 105 and 106). Choices: 40Hz, 60Hz, 80Hz, 90Hz, 100Hz, 110Hz,

120Hz, 160Hz, 200Hz

Presence

40Hz

Bass Out

60Hz

Bass Cross Over

80Hz

SWFR Phase

90Hz

PR/SB Priority

100Hz

•Select “Normal” if you do not want to reverse the phase of your subwoofer.

•Select “Reverse” to reverse the phase of your subwoofer.

PR/SB Priority

(Presence/surround back speaker priority)

Use this feature to prioritize either the presence or the surround back speakers when playing sources that contain surround back channel signals using the CINEMA DSP sound field programs.

Choices: Presence, Surround Back

Bass Cross Over

 

SWFR Phase

Presence

PR/SB Priority

Surround Back

•Select “Presence” to use the presence speakers even when surround back channel signals are input. The signals for the surround back channel will be output from the surround speakers.

•Select “Surround Back” to use the surround back speakers when surround back channel signals are detected in a CINEMA DSP program. The presence channel signals are output from the front speakers.

OPERATION

ADVANCED

 

 

107 En