GRAPHIC USER INTERFACE (GUI) SCREEN

Zone2 Initial Vol./Zone3 Initial Vol. (Zone 2/Zone 3 Initial volume)

Use this feature to set the volume level of Zone 2 or Zone 3 when the power of this unit is turned on.

Choices: Off, –80 dB to +16.5 dB

Control step: 0.5 dB

Zone2 Volume

Zone2 Max Vol.

Zone2 Initial Vol.

Off

Note

The “Zone2 Max Vol.” or “Zone3 Max Vol.” setting takes priority over the “Zone2 Initial Vol.” or “Zone3 Initial Vol.” setting.

■Sur.Initialize (Surround initialize)

Use this feature to initialize the parameters for each sound field program within sound field program groups. When you initialize a sound field program group, all of the parameter values within that group revert to their initial settings.

Adjusted sound field parameter settings are displayed in blue.

Choices: CLASSICAL, LIVE/CLUB,

ENTERTAINMENT, MOVIE, STEREO, SUR. DECODE, All

Zone2 Set

CLASSICAL

■Audio Select

(Default Audio input jack select)

Use this feature to designate the default Audio input jack select setting when you turn on the power of this unit. Choices: Auto, Last

Zone3 Set

 

Sur.Initialize

 

Audio Select

Auto

Decoder Mode

Last

Memory Guard

 

•Select “Auto” if you want this unit to automatically detect the type of input signals and select the appropriate Audio input jack select setting.

•Select “Last” if you want this unit to automatically select the last selected Audio input jack select setting used for the connected input source.

■Decoder Mode (Default decoder mode)

You can select the decoder used by this unit. Choices: Auto, Last

Sur. Initialize

 

Audio Select

 

Decoder Mode

Auto

Memory Guard

Last

HDMI Set

 

• Select “Auto” if you want this unit to automatically

detect input signal types and select the appropriate

Zone3 Set

LIVE/CLUB ENTERTAINMENT

decoder.

Sur.Initialize

MOVIE

• Select “Last” if you want this unit to automatically

Audio Select

STEREO SUR. DECODE

select the last decoder used for the connected source.

Decoder Mode

All

•Press k / n / l / h to select the sound field program you want to initialize and then press ENTER.

•Select “All” to initialize settings for all sound field program parameters.

Note

Sound field program groups cannot be initialized when “Memory Guard” is set to “On” (see page 114).

■Memory Guard (Memory Guard)

Use this feature to prevent accidental changes to DSP program parameter values and other system settings. Choices: Off, On

Audio Select

 

Decoder Mode

 

Memory Guard

Off

HDMI Set

On

Select “On” to protect:

•DSP program parameters

•All menu items except “Memory Guard” and “System Memory” – “Load”.

•The start and reload of the “Auto Setup” procedure.

114 En