■Clearing a macro function

You can clear the function programmed for a certain macro button.

1Set the operation mode selector to AMP or SOURCE and then press MACRO using a ballpoint pen or similar object.

“MCR ?” appears in the display window on the remote control.

AMP

SOURCE

TV

or

MACRO

 

AMP

SOURCE

TV

Note

If you do not complete each of the following steps within 30 seconds, the macro programming mode will be automatically canceled. In this case, start over from step 1.

2Press and hold CLEAR using a ballpoint pen or similar object, then press the macro button you want to clear for about 3 seconds.

“C;OK” appears in the display window on the remote control if clearing was successful.

V-AUX/DOCK

CBL/SAT

MD/TAPE

CD-R

DTV

VCR 1

DVR/VCR 2

DVD

OFF ON

MACRO

LEARN CLEAR

RENAME

(U.S.A. model)

y

•If you continuously want to clear another function, repeat step 2.

•Once you clear a programmed function, the button reverts to the factory setting (or to the manufacturer setting if you have set remote control codes).

3Press MACRO again to exit the macro programming mode.

Notes

•“C;NG” appears in the display window on the remote control if clearing was unsuccessful. In this case, start over from step 2.

•“ERROR” appears in the display window on the remote control if you press more than one button simultaneously.

REMOTE CONTROL FEATURES

OPERATION

ADVANCED

 

 

129 En