Yamaha 376, RX-V2700, Stereo Receiver 85 En, ■Selecting decoders used with sound field programs

ADVANCED SOUND CONFIGURATIONS

SUR.DECODE	SUR. DECODE	PLIIx Game
6		PL II Game

Dolby Pro Logic IIx (or Dolby Pro Logic II) processing for game sources. The Pro Logic IIx decoder is not available when “Surround

Back” is set to “None” (see page 106).

SUR.DECODE	SUR. DECODE	Neo: 6 Cinema
6

DTS processing for movie sources.

SUR.DECODE	SUR. DECODE	Neo:6 Music
6

DTS processing for music sources.

Center Image

SUR.DECODE		neural sur.
	SUR. DECODE	(U.S.A. and Canada
6
		models only)

Neural Surround processing for any sources.

The Neural Surround decoder is compatible with PCM signals (32 kHz, 44.1 kHz, 48 kHz, 64 kHz, 88.2 kHz and 96 kHz) and analog 2- channel input sources. When Neural Surround-incompatible signals are being input while the Neural Surround decoder is selected, multi- channel sources are decoded straight into the appropriate channels without any additional effect processing and the Neural Surround- incompatible PCM signals are played back in stereo. The Neural Surround decoder is especially suitable for the XM HD Surround program of XM Satellite Radio.

y

When you select the surround decode mode for Dolby Digital, DTS or DTS 96/24 sources, this unit automatically selects “SURROUND DECODE Dolby Digital”, “SURROUND DECODE DTS” or “SURROUND DECODE DTS 96/24” program.

■Selecting decoders used with sound field programs

Use this feature to select the desired decoder used with MOVIE sound field programs (except “Mono Movie”). See page 49 for details about MOVIE sound field program.

1Set the operation mode selector to AMP and then press MOVIE on the remote control repeatedly to select the desired MOVIE sound field programs.

AMP

MOVIE

SOURCE

4

TV

Available decoders (Decoder Type)

Decoder	Functions
PRO LOGIC	Dolby Pro Logic processing for
	any sources
	Dolby Pro Logic IIx (or Dolby
PLIIx Movie	Pro Logic II) processing for
	movie sources. The Pro Logic IIx
PLII Movie	decoder is not available when
	“Surround Back” is set to “None”
	(see page 106).
Neo:6 Cinema	DTS processing for movie
	sources

2Press SELECT repeatedly to select the desired decoder used with the selected sound field program.

You can select from the following decoders depending on the type of source you are playing and your personal preference.

y

•You can select the desired decoder by pressing SELECT and then press l / h repeatedly on the remote control.

•You can also select decoders used with sound field programs by using GUI screen. Set “Decoder Type” in Stereo/Surround” to the desired setting (see page 88).

85 En