GRAPHIC USER INTERFACE (GUI) SCREEN

■LFE Level (Low-frequency effect level)

Use this feature to adjust the output level of the LFE (low-frequency effect) channel according to the capacity of your subwoofer or headphones. The LFE channel carries low-frequency special effects which are only added to certain scenes. This setting is effective only when this unit decodes Dolby Digital or DTS signals. Control range: –20.0 to 0.0 dB

Control step: 1.0 dB

Speaker

0.0dB

Headphone

Speaker (Speaker low-frequency effect level)

Select to adjust the speaker LFE level.

Headphone (Headphone low-frequency effect level)

Select to adjust the headphone LFE level.

Note

Depending on the settings of “LFE Level”, some signals may not be output at the SUBWOOFER jack.

■Dynamic Range (Dynamic range)

Use this feature to select the amount of dynamic range compression to be applied to your speakers or headphones. This setting is effective only when the unit is decoding Dolby Digital and DTS signals.

Choices: MAX (maximum), STD (standard), MIN (minimum)

Speaker

MAX

Headphone

STD

 

MIN

Speaker (Speaker dynamic range)

Select to adjust the speaker compression.

Headphone (Headphone dynamic range)

Select to adjust the headphone compression.

•Select “MAX” to preserve the greatest amount of dynamic range.

•Select “STD” for general use.

•Select “MIN” for listening to sources at low volume levels.

■Parametric EQ (Parametric equalizer)

Use this feature to adjust the parametric equalizer of each speaker.

LFE Level

 

Dynamic Range

 

Parametric EQ

Test Tone

Tone Control

Front L

Audio Option

Front R

1Press k / n / l / h to select Test Tone or the speaker you want to adjust.

•Select “Test Tone” to choose whether turns on or off the test tone output when adjusting the tonal quality of each speaker.

•Select “Front L” to adjust the tonal quality of the front left speaker.

•Select “Front R” to adjust the tonal quality of the front right speaker.

•Select “Center” to adjust the tonal quality of the center speaker.

•Select “Surround L” to adjust the tonal quality of the surround left speaker.

•Select “Surround R” to adjust the tonal quality of the surround right speaker.

•Select “Surround Back L” to adjust the tonal quality of the surround back left speaker.

•Select “Surround Back R” to adjust the tonal quality of the surround back right speaker.

•Select “Presence L” to adjust the tonal quality of the presence left speaker.

•Select “Presence R” to adjust the tonal quality of the presence right speaker.

•Select “Subwoofer” to adjust the tonal quality of the subwoofer.

2Press h to access the settings window.

 

PARAM

RESET

Test Tone

EDIT

EXIT

Band / Gain

 

 

 

Front L

 

 

Front R

 

 

Center

 

 

3Press k / n / l / h to select “PARAM” and then press ENTER to select a parameter from “Band” (band), “Freq.” (frequency) or “Q” (Q factor).

y

You cam adjust the gain with any parameter.

98 En