CONNECTIONS

Audio and video signal flow

■ Audio signal flow

■ Video signal flow

InputOutput

HDMI

DIGITAL AUDIO (COAXIAL)

DIGITAL AUDIO (OPTICAL)

AUDIO

Digital output

Analog output

Notes

•2-channel as well as multi-channel PCM, Dolby Digital and DTS signals input at the HDMI IN 1, HDMI IN 2 or HDMI IN 3 jack can be output at the HDMI OUT jack only when “Support Audio” is set to “Other” (see page 115).

•Audio signals input at the HDMI IN jacks are not output at the analog AUDIO OUT and DIGITAL OUTPUT jacks.

InputOutput

HDMI

COMPONENT

VIDEO

S VIDEO

VIDEO

Through

Video conversion (see page 102)

Component interlace/progressive up-conversion (see page 102)

HDMI interlace/progressive up-conversion and resolution up- scaling (see page 102)

Notes

•When the analog video signals are input at the COMPONENT VIDEO, S VIDEO and VIDEO jacks, the priority order of the input signals is as follows:

1.COMPONENT VIDEO

2.S VIDEO

3.VIDEO

•The analog video signals output at the COMPONENT VIDEO jacks can be deinterlaced from 480i (NTSC)/576i (PAL) to 480p/576p. Set “Component I/P” to “On” in “Video” to activate this feature (see page 102).

•Digital video signals input at the HDMI IN 1, HDMI IN 2 or HDMI IN

3jack cannot be output to analog video output jacks.

•The analog component video signals with 480i (NTSC)/576i (PAL) of resolution are converted to the s-video or composite video signals and output at the S VIDEO MONITOR OUT and VIDEO MONITOR OUT jacks.

•Component interlace/progressive conversion (see page 102) and HDMI up-scaling (see page 102) are available only when “Conversion” is set to “On” (see page 102).

•Use the “HDMI Up-Scaling” parameter in “Video” to deinterlace and convert the resolution of the analog video signals output at the HDMI OUT jack (see page 102).

•The GUI screen signal is not output at the VCR 1 OUT and DVR/VCR 2 OUT jacks and is not recorded.

22 En