GRAPHIC USER INTERFACE (GUI) SCREEN
DNS Server (P) (Primary DNS server) DNS Server (S) (Secondary DNS server)
Use this parameter to specify the IP address of the primary and secondary DNS (Domain Name System) servers.
Note
If you have only one DNS address, enter the DNS address in “DNS Server (P)”. If you have two or more DNS addresses, enter one of them in “DNS Server (P)” and another in
“DNS Server (S)”.
Setup (Setup)
Select “Setup” to confirm the settings of the “Network” parameters.
1Press k / n on the remote control repeatedly and then press h to select and enter the desired network parameter.
Note
When “DHCP” is set to “ON”, you cannot select and adjust any other network settings. To specify the other parameters, you need to first set “DHCP” to “OFF”.
2To specify the parameter, press k / n repeatedly to change the number and press l / h to select the digit to change.
3Press ENTER to confirm the parameter.
4Repeat steps 1 through 3 to configure each network parameter.
5Select “Setup” and then press ENTER to finish configuration.
Note
In case you have changed your network configuration, you may need to reconfigure the network settings again.
y
You can reset the network settings of this unit to the initial factory settings by using
■Play Style (Playback styles)
Use this feature to adjust the playback style according to your preference. You can shuffle songs in a random order or repeat one specific song or a sequence of songs.
Network |
|
Play Style | Repeat |
Information | Shuffle |
Repeat (Repeat)
Use this feature to set this unit to repeat one song or a sequence of songs.
Choices: Off, Single, All
•Select “Off” to deactivate this feature.
•Select “Single” to set this unit to repeat one song.
•Select “All” to set this unit to repeat a sequence of songs.
Notes
•When “Repeat” is set to a setting other than “Off”, “
” or “ 
” appears in the top right corner of the playback status screen while one song or a sequence of songs are being repeated.
•If “Repeat” is set to “Single”, the setting will be reset to “Off” when the main zone, Zone 2 and Zone 3 are turned off.
Shuffle (Shuffle)
Use this feature to set this unit to play songs or albums in a random order.
Choices: Off, On
•Select “Off” to deactivate this feature.
•Select “On” to set this unit to play songs or albums in a random order.
Note
When “Shuffle” is set to “On”, “ 
” appears in the top right corner of the playback status screen while songs or albums are being shuffled.