GRAPHIC USER INTERFACE (GUI) SCREEN
■Front Panel Disp.
(Front panel display setting)
Dimmer (Dimmer)
Use this feature to adjust the brightness of the front panel display.
Control range: – 4 to 0
Dimmer | 0 |
Scroll
Scroll (Front panel display message scroll)
Use this feature to set whether to display the information (such as song title or channel name) in the front panel display in a continuous manner or by the first 14 alphanumeric characters after scrolling all characters once when “XM”, “DOCK” or “NET/USB” is selected as the input source.
Choices: Continue, Once
Dimmer
Scroll | Continue |
Once
•Select “Continue” to display the operation status in the front panel display in a continuous manner.
•Select “Once” to display the operation status in the front panel display by the first 14 alphanumeric characters after scrolling all characters once.
■iPod (iPod settings)
Standby Charge
(iPod Charge on the standby mode)
Use this feature to select whether this unit charges the battery of the stationed iPod or not when this unit is in the standby mode (see page 75).
Choices: Off, Auto
Off
Standby Charge | Auto |
■Zone OSD (on-screen display)
Use this feature to display the operational status of Zone 2 as well as Zone 3 on the Zone 2 video monitor connected to the ZONE VIDEO jacks on the rear panel of this unit.
The Zone 2 and Zone 3 information to be displayed is listed as follows:
•The input source of Zone 2 and Zone 3
•The volume level of Zone 2 and Zone 3
•The audio mute status of Zone 2 and Zone 3
•The tonal quality status of Zone 2 and Zone 3
•The XM Satellite Radio information when XM is selected as the input source of Zone 2 and Zone 3
Choices: Off, Zone2, Zone2&Zone3
Front Panel Disp. | Off |
iPod | Zone2 |
Zone OSD | Zone2&Zone3 |
Zone2 Set |
|
Zone3 Set |
|
•Select “Off” not to display any operational status of Zone 2 and Zone 3 on the Zone 2 video monitor.
•Select “Zone2” to display the operational status of Zone 2 only on the Zone 2 video monitor.
•Select “Zone2&Zone3” to display the operational status of Zone 2 and Zone 3 on the Zone 2 video monitor.
Notes
•If “Zone OSD” is set to “Zone2&Zone3”, changes to the operational status of Zone 3 is displayed on the Zone 2 video monitor. For example, if the input source of Zone 3 is changed while you are watching TV in Zone 2, the name of the changed input source of Zone 3 is displayed on your TV in Zone 2.
•If “Zone OSD” is set to “Zone2&Zone3”, the display contents of Zone 2 and Zone 3 depends on whether or not Zone 2 and Zone 3 are turned on with ZONE 2 ON/OFF and ZONE 3 ON/ OFF on the front panel (see page 131).
–If both Zone 2 and Zone 3 are turned on, the video signals of the current input source of Zone 2 and the corresponding OSD are displayed on the Zone 2 video monitor.
–If Zone 2 is turned off and Zone 3 is turned on, only the corresponding OSD is displayed in the gray background regardless of the REC OUT/ZONE 2 status on the front panel.
–If Zone 2 is turned on and Zone 3 is turned off, the video signals of the current input source of Zone 2 and the corresponding OSD are displayed on the Zone 2 video monitor.
–If both Zone 2 and Zone 3 are turned off, no video signals and no OSD are displayed on the Zone 2 video monitor.
•Select “Off” to charge the battery of the stationed iPod only when this unit is turned on.
•Select “Auto” to charge the battery of the stationed iPod when this unit is turned on and in the standby mode.