REMOTE CONTROL FEATURES
3Press k / n to select and enter a character.
Pressing n changes the character as follows:
A to Z, 1 to 9, 0, + (plus), – (hyphen), ; (semicolon), / (slash), and space.
Pressing k changes the characters in reverse order.
PRESET/CH
ENTER
A/B/C/D/E
4Press h to move the cursor to the next position.
PRESET/CH
ENTER
A/B/C/D/E
y
Press l to move the cursor to the previous position.
5Press ENTER to set the new name.
“OK” appears in the display window on the remote control if renaming was successful.
“NG” appears in the display window on the remote control if renaming was unsuccessful. In this case, start over from step 3.
y
If you continuously want to rename another input area, press the input selector button, or press SELECT k/ nrepeatedly to select the component, then repeat steps 3 through 5.
6Press RENAME again to exit the renaming mode.
RENAME
Note
“ERROR” appears in the display window on the remote control if you press a button not indicated in the respective step, or when you press more than one button simultaneously.
y
This feature is useful when you change the input or output assignment for digital jacks and component video input jacks. Refer to “Rename” on page 95.
The macro programming feature makes it possible to perform a series of operations with the press of a single button. For example, when you want to play a CD, normally you would turn on the components, select the CD input, and press the play button to start playback. The macro programming feature lets you perform all of these operations simply by pressing the CD macro button. The buttons listed as macro buttons below are factory set with macro programs. You can also program your own macros (see page 126).
■MACRO operations
Macro buttons | (U.S.A. model) | ||||||
|
|
|
| ||||
|
|
|
| 1 | MEMORY 2 | NIGHT ENHANCER | |
|
|
|
| 9 |
| 0 | +10 ENT |
POWER | POWER | STANDBY | POWER | FREQ/TEXT | EON | MODE PTY SEEK START | |
|
|
|
| ||||
TV | AV |
|
| NET RADIO | USB |
| |
|
|
|
| REC |
|
| |
| NET/USB AUDIO SEL | SLEEP |
|
|
|
| |
|
|
|
| PC/MCX |
|
| |
PHONO | TUNER | CD | MULTI CH IN | OFF | ON | MACRO LEARN CLEAR RENAME | |
|
|
|
| ||||
DTV | VCR 1 | DVR/VCR 2 | DVD |
|
|
|
|
|
|
|
| MACRO ON/OFF |
|
| MACRO |
1Set the MACRO ON/OFF selector to ON.
OFF ON MACRO LEARN CLEAR
2Press the desired macro button.
3Set the MACRO ON/OFF selector to OFF when you finish to using the macro programming operation.
OFF ON MACRO LEARN CLEAR
Notes
•While the remote control is running a macro program, it does not accept any other operation until it has completed running the program (the transmission indicator stops flashing).
•Continue to aim the remote control at the component the macro is operating until the macro operation is complete.