NET RADIO

Selects the Internet radio as the sub input source of NET/USB.

USB

Selects a USB memory device or a USB portable audio player as the sub input source of NET/USB.

Notes

•Press NET/USB to select “NET/USB” as the input source before you press any of the network and USB input selector buttons stated above to select the corresponding sub input source of NET/USB.

•When you press any of the network and USB input selector buttons, the contents previously played for the corresponding sub input source of NET/USB is automatically played.

BMACRO ON/OFF

Turns on or off the macro function (see page 124).

CMACRO

Programs a series of operations to be controlled with a single button (see page 124).

DSTANDBY

Sets the main zone to the standby mode (see page 34).

Note

This button is operational only when MASTER ON/OFF on the front panel is pressed inward to the ON position.

EPOWER

Turns on the main zone (see page 34).

Note

This button is operational only when MASTER ON/OFF on the front panel is pressed inward to the ON position.

FAUDIO SEL

Toggles the priority for the type of audio input jack between “AUTO”, “HDMI”, “COAX/OPT” and “ANALOG” when one component is connected to two or more input jacks (see page 42).

GSLEEP

Sets the sleep timer (see page 45).

HSELECT k / n

Selects another input source that you can control independently of the input source selected with the input selector buttons.

IOperation mode selector

Selects the operation mode of the remote control buttons in the shaded area.

AMP

Operates the amplifier function of this unit.

CONTROLS AND FUNCTIONS

SOURCE

Operates the component selected with an input selector button (see page 119).

TV

Operates the TV assigned to either DTV or PHONO (see page 118).

Notes

•To set the remote control codes for other components, see page 120.

•When you set the remote control codes for both DTV and PHONO (see page 120), priority is given to the one set for DTV.

JVOLUME +/–

Increases or decreases the volume level.

KMUTE

Mutes the audio output. Press again to restore the audio output to the previous volume level (see page 43).

LPURE DIRECT

Turns on or off the pure direct mode (see page 52).

MSET MENU

Activates the GUI screen (see page 44).

NSTRAIGHT

Turns the sound field programs off or on. When the “STRAIGHT” mode is selected, 2-channel or multi- channel input signals are output directly from their respective speakers without effect processing (see page 51).

OEXTD SUR.

Switches between 5.1 and 6.1/7.1-channel playback of multi-channel sources (see page 84).

PSELECT

Selects decoders for 2-channel sources (see pages 84 and 85).

QENHANCER

Turns on or off the Compressed Music Enhancer mode (see page 54).

RNIGHT

Turns on or off the night listening modes (see page 55).

SRENAME

Changes the name of the input source in the display window (see page 123).

TCLEAR

Clears remote control functions acquired from the learn, macro and/or rename features (see page 127).

ULEARN

Programs remote control codes of functions from other remote controls (see page 122).

INTRODUCTION

9 En