Znyx Networks bh5700 manual Querying Base Interface ekey Status, Link Status for a single port

10hd – Ethernet Half Duplex

Pause: Enable: a port that can temporarily suspend the data transmission between two network devices in the event that one of the devices becomes congested. Pause enabled devices can reduce bottlenecks by making the network more efficient.

Disabled: The pause feature is not enabled and will continue to transmit traffic when even when the receiving device is busy.

Faults: Internal: An internal fault indicates a severe hardware failure

External: An external fault indicates that a port has been configured to active, but a link has not been established.

OK: ON: Indicates that the Ethernet Switch Blade has successfully loaded OpenArchitect.

Querying Base Interface ekey Status

Link Status for a single port

To query a link status for a single port type zre<x> query for example:

zlc zre13 query

Example Output:

sh-2.04# zlc 13 query

zre13: <UP, 100FD, PAUSE ENABLE OFF, OK ON> sh-2.04#

Link Status for a range of ports

To query the link status for a range of ports type zre<x>..<x> query for example:

zlc zre0..23 query

Example Output:

Ethernet Switch Blade User's Guide release 3.2.2j page 167