Znyx Networks bh5700 manual 100

Example Configuration Scripts		92
Overview of OpenArchitect VLAN Interfaces		93
Tagging and Untagging VLANs		94
Switch Port Interfaces		94
Layer 2 Switch Configuration		94
Using the S50layer2 Script		96
Rapid Spanning Tree		96
To Enable Rapid Spanning Tree:		96
Port Path Cost		97
Layer 3 Switch Configuration		97
Using the S50layer3 Script		98
Layer 3 Switch Using Multiple VLANs		100
Using the S50multivlan Script		100
To Modify the Layer 3 Multivlan Script		102
Modify the example script you copied into the /etc/rcZ.d directory. Adjust and
assign the number of IP addresses as applicable. In the example below, the IP
address is changed for the interface in the ifconfig command line of the script.
...........................................................................................................................		102
Layer 3 Routing Protocols with GateD		102
Using the Provided S55gatedRip1 Script		102
To Modify the GateD Scripts:		104
Class of Service (COS)		105
Egress Queues		105
Ingress Classification		105
Marking and Re-marking		106
Scheduling		106
zcos		106
zfilterd		106
ztmd		106
Running zfilterd		107
Restrictions on Implementation		107
Conflict Resolution		107
iptables and filtering		108
Introduction		109
Packet Walk		110
Filter Rules Specifications		110
Specifying Source and Destination IP Addresses		110
Specifying Protocol		110
Specifying an ICMP Message Type		110
Specifying TCP or UDP ports		111
Specifying TCP flags		111
Specifying an Interface		111
Filter Rule Targets		111
Supported Targets		111
Ethernet Switch Blade User's Guide	release 3.2.2j	page viii