Znyx Networks bh5700 manual No router multicast traffic. Default is 260 seconds

-f Run zsnoopd in foreground. Default is to run it in background.

-h <hostname>		Connect to remote host <hostname>.
-p <ppa>	Start zsnoopd on switch <ppa>. Default is 0.
-r <sec>	Time to wait, in seconds, before removing a port with
no router multicast traffic. Default is 260 seconds.
-t <sec>	Time to wait, in seconds, before removing a port with
no host multicast traffic. Default is 260 seconds.
-u <sec>	Time to wait, in seconds, before checking port
timeouts.
-v <vlan_id>		Enable zsnoopd for VLAN <vlan_id>. Default is to

enable zsnoopd on all VLANs. This option may be entered more than once.

EXAMPLES

In the following example, zsnoopd starts a background task that monitors incoming IGMP packets and updates the Multicast Table (MARL) accordingly. This background task continues throughout the life of the Layer 2 network.

zsnoopd

Once you run zsnoopd, use zmarl to display the contents of the MARL. zsnoopd deletes all entries in the MARL when starting up, and when shutting down. Manual changes to the MARL are not recommended while zsnoopd is running.

SEE ALSO

zconfig, zgmrpd

Ethernet Switch Blade User's Guide release 3.2.2j page 326