Znyx Networks bh5700 manual Ethernet Switch Blade Users Guide Release 3.2.2j

#This script will likely need modification for your particular

#network setup.

#

#In this example the Egress ports, zre20..23 and zre48..50 are

#not managed by HA since how, or if, these ports are managed by HA is

#dependent on the external devices they are connected to.

Non-HA

#egress ports can be brought up through conventional means by adding

#an S-script to /etc/rcZ.d. If the ports are to be managed by HA, they

#can be added to an existing VLAN(zhp) or a new VLAN(zhp) can be created

#If a new VLAN(zhp) is to be managed by HA, add a zconfig, sibling_address,

#and vrrp_virtual_address configuration line and define the port type as

#appropriate.

#

#The interconnect port is needed in the VLANs connected to the

#RAINlink ports.

#

zconfig zhp0: vlan100 = zre51;

zconfig zhp1: vlan1 = zre0, zre4, zre8, zre12, zre16, zre24, zre28, zre30, zre32, zre34, zre36, zre38, zre40, zre42, zre51;

zconfig zhp2: vlan2 = zre1, zre5, zre9, zre13, zre17, zre25, zre29, zre31, zre33, zre35, zre37, zre39, zre41, zre43, zre51;

zconfig zhp3: vlan3 = zre2, zre6, zre10, zre14, zre18, zre26, zre51;

zconfig zhp4: vlan4 = zre3, zre7, zre11, zre15, zre19, zre27, zre51;

Ethernet Switch Blade User's Guide release 3.2.2j page 36