Znyx Networks bh5700 manual Arp

#crossconnect ports of the VRRP Backup. The block_crossconnect mode is

#meant as a replacement for STP, however, the switches connected to the

#crossconnect ports must be Ethernet Switch switches running Surviving Partner.

#

#The RAINlink_xmit_on_failover mode requires that the OpenNode blades

#connected to RAINlink ports transmit a packet when failing over, so that

#The Layer 2 tables will learn the new port/MACaddress relationship. An

#example is the SNAP_BCAST_MODE in RAINlink or a gratuitous

ARP.

vrrp_mode: RAINlink_xmit_on_failover;

#vrrp_mode: block_crossconnect;

#failover modes

#switch-failover, VLAN-failover or port-failover are mutually exlusive. They

#describe what occurs if a port fails. For switch-failover, if any port

#fails, all functionality of the current switch is moved to the backup

#For vlan-failover, if a port fails in the vlan then all the ports that

#are a member of that VLAN are failed over. For port- failover, each port

#can failover independently. For vlan and port failover the

#interconnect will need to be used to maintain connectivity, requiring

#all VLANs to include the interconnect ports.

Ethernet Switch Blade User's Guide release 3.2.2j page 39