Znyx Networks bh5700 manual Zpeer peer state query

zpeer peer state query

The output from the above command during the boot process would be “unhealthy”

The -aoption can be used to display a complete listing of all state and priority information and internal information that can be used for debugging. Here is example output from the -aoption.

	Local/Write	Peer/Read
priority	203	231
state	master	backup
data	2cb	2e7
position bytebit	28	20
status	50(ACK)	0()

The priority and state rows are the same values returned by the query command. The information in the data, position and status rows are internal debugging information that is useful to support engineers when diagnosing problems in the field.

The -roption should not be used while HA is running. It can cause loss of coordination between the two switch planes. The -roption will reset all internal communication values, and possibly require the peer to be reset also.

OPTIONS

-d set debug level to <level>

-a Display complete status of zpeer

-r Reset all values in the zpeer communication. Can cause loss of communication with the peer requiring the peer to be also reset.

SEE ALSO

zspconfig

Ethernet Switch Blade User's Guide release 3.2.2j page 327