Znyx Networks bh5700 manual # zre names cannot be mixed on the same line

vrrp_virtual_address: zhp1 = 10.0.0.42 netmask 255.0.0.0;

vrrp_virtual_address: zhp2 = 11.0.0.42 netmask 255.0.0.0;

vrrp_virtual_address: zhp3 = 12.0.0.42 netmask 255.0.0.0;

vrrp_virtual_address: zhp4 = 13.0.0.42 netmask 255.0.0.0;

#Port definitions

#Define to what the ports are connected. Specifications can

be

#by zhp or zre name. The zhp name is a shortcut to specify

the

#entire port group associated with that interface. In the end

#these definitions are on a port by port basis. Note: zhp and

#zre names cannot be mixed on the same line.

#

#Shelf manager ports should be defined as monitor_only. monitor_only ports

#are used in failover calculations, but the failover mechanism is left

#to the software running on the shelf managers cards. The use of the

#term "crossconnect" in these HA scripts is not the same as the use

#in ATCA shelf managers.

interconnect: zhp0;

RAINlink: zre0..19, zre24..43;

############################# Special Modes

#############################

#VRRP modes

#The block_crossconnect mode causes the equivalent of STP blocking on the

Ethernet Switch Blade User's Guide release 3.2.2j page 38