Znyx Networks bh5700 manual Ethernet Switch Blade Users Guide Release 3.2.2j

#Fabric portions of the 7100 switch. The actual coordination is dependent on the

#setting of the board_synchronization_mode and the

failover_mode. In

#switch failover_mode the number of up links in both switch planes is

#considered. In vlan and port failover mode they are not. In

all

#failover_modes, if the data plane or fabric plane switch reboots or

#power cycles, the HA partner will take mastership for all VLANs in

#both planes. board_synchronization is off by default. "basic" is the

#only supported mode at this time. The same mode must be set in both

#the base and fabric switches.

#board_synchronization_mode: basic;

#vrrpd_script: Allows the user to add scripts to be executed during

#vrrpd state transitions. These scripts are run from the end of the

#/etc/rcZ.d/surviving_partner/vrrpd.script file. The user provided

#script must be well behaved. If it crashes, or hangs or delays it will

#effect the SurvivingPartner performance. The script is not run in

#backround. If this is needed, have your script background itself.

#vrrpd_script: /etc/rcZ.d/surviving_partner/my_vrrpd_script;

#vrrpd_script: /etc/rcZ.d/surviving_partner/my_vrrpd_script2;

Ethernet Switch Blade User's Guide release 3.2.2j page 41