Znyx Networks bh5700 manual Network interface actions may include

The syntax for a network interface statement is the interface name followed by a colon and an action. Network interface statements are used to create or tear down a VLAN group and can consist of one or a list of network interface names; followed by a colon and then an action. For example:

zhp0: <Network Interface Action>;

Network interface actions may include:
vlan<N> = list of ports or trunks			VLAN
Creates a network interface		and a VLAN group with a
identification number (VID)		consisting of specified	port
members.
<N>	is an integer between 1-4095.
list of ports or trunks		with the zre<X> format,	where x
A port member is identified

represents a port number between 0-23 for the in-band ports. A trunk is identified with the zrl<Y> format, where Y is a number between 0-31.

If the network interface and VLAN group already exist, the specified ports or trunks are added to the network interface and VLAN group.

teardown	Deletes the network interface and the associated
VLAN group.
zre_list	= multicast <mac_address>

Register the multicast <mac_address> on the zre_list ports associated with the given VLAN

multicast_clear Clear all registered multicast address on all the ports in the VLAN

<list of ports or		trunks>	teardown
Deletes	the specified ports or trunks from the network
interface and the		VLAN group associated with it. If there are
no remaining port		or trunk	members, then also deletes the
network	interface	and VLAN	group.

Examples of Network Interface Statements:

The statement below creates a VLAN group with the VID number 1 and the network interface named zhp5. This VLAN includes a single switch port, zre1.

zhp5: vlan1=zre1;

The next statement creates a VLAN group with the VID number 100 and the network interface

Ethernet Switch Blade User's Guide release 3.2.2j page 202