Znyx Networks bh5700 manual Configuring Surviving Partner, You will see output similar to this

#gated_template: Allows the user to provide a template for

the

#gated.conf file to be used by the sibling group.

#gated_template: /etc/rcZ.d/surviving_partner/gated.template

Once the configuration files are complete, run the zspconfig utility on the Master to configure all the scripts:

NOTE: This command can take 60 seconds or more with no screen output.

zspconfig –f zsp.conf

You will see output similar to this:

zspconfig -f zsp.conf ….

Would you like to install the Surviving Partner startup script[y,n,?] y

Would you like to start the Surviving Partner daemons without rebooting [y,n,?] y

Once configuration is complete, insure there are no superfluous S-type startup scripts in /etc/rcZ.d, and zsync your switch to save your configuration.

Now go to the backup switch and run zspconfig –uto get the appropriate configuration information from the Master,

zspconfig –u zhp0

Configuring Surviving Partner

The S60SP_startup script is useful in setting up proper switch replacement. By factory installing the S60SP_startup script in replacement switches, the replacement switches will boot looking for a Master switch configuration. The S60SP_startup works as follows:

It first looks for a local file /etc/rcZ.d/surviving_partner/zsp.primary.conf. If this

file exists, it is used to configure the switch. Only the originally configured switch or Central Authority should contain this file. See Central Authority later in this Chapter for more information.

Next it uses zspconfig –uto attempt to contact a running Master switch to retrieve the proper configuration. This is the normal case for a replacement switch.

Ethernet Switch Blade User's Guide release 3.2.2j page 42