Znyx Networks bh5700 manual You will see output similar to this

Once the configuration files are complete, run the zspconfig utility on the Master to configure all the scripts:

NOTE: This command can take 60 seconds or more with no screen output.

zspconfig –f zsp.conf

You will see output similar to this:

zspconfig -f zsp.conf ….

Would you like to install the Surviving Partner startup script[y,n,?] y

Would you like to start the Surviving Partner daemons without rebooting [y,n,?] y

Once configuration is complete, insure there are no superfluous S-type startup scripts in /etc/rcZ.d, and zsync your switch to save your configuration.

Now go to the backup switch and run zspconfig –uto get the appropriate configuration information from the Master,

zspconfig –u zhp0

Modifying zsp_vlan.conf on the Fabric Switch

An example file for setting up zspconfig on a Ethernet Switch Blade Fabric board is /etc/rcZ.d/surviving_partner/zsp_vlan.conf. Reference the descriptions in the previous section for descriptions of each configuration section.

#Sample configuration is based on the idea that there are separate VLANs

#for the multiple connections to a slot.

#

#zhp0: Interconnect VLAN

#zhp1..4: Data interface VLANs, configured such that

Option 2

#slots have 2 VLANs connected to them and Option 3 slots

have

#4 VLANs connected to them.

#

Ethernet Switch Blade User's Guide release 3.2.2j page 35