Znyx Networks bh5700 manual Zbootcfg -d

application flash. Typically this is required before updating application flash 1. By booting the alternative image, if a failure occurs during the programming of application flash 1, recovery is easier.

zbootcfg -d 2

The next example passes the -ioption to the booting kernel. This is useful when recovering from a mistake saved to the read-write file system or after updating the application flash 1 and doing the first boot. The -ioption prevents the read-write file system from overwriting the initial RAM disk image.

zbootcfg -d 1 –i

SEE ALSO

zflash, reboot(8)

Ethernet Switch Blade User's Guide release 3.2.2j page 273