7

Tutorials

Here are examples of using the Web Configurator to set up features in the ZyWALL. See also Chapter 8 on page 171 for an example of configuring L2TP VPN.

Note: The tutorials featured here require a basic understanding of connecting to and using the Web Configurator, see Chapter 3 on page 51 for details. For field descriptions of individual screens, see Technical Reference on page 207.

7.1How to Configure Interfaces, Port Grouping, and Zones

This tutorial shows how to configure Ethernet interfaces, port grouping, and zones for the following example configuration (see Section 6.2.2 on page 98 for the default configuration).

Interface ge2 uses a static IP address of 1.2.3.4 and is in the WAN zone.

DMZ servers are connected to ports P4 and P5 and need full wire speed communication with each other, so ports P4 and P5 are combined into a ge4 interface port group. It uses IP address 192.168.2.1.

 

119

ZyWALL USG 2000 User’s Guide