Chapter 3 Web Configurator

 

Table 6 Configuration Menu Screens Summary (continued)

 

FOLDER OR

TAB

FUNCTION

 

LINK

 

 

 

 

Interface

Port Grouping

Configure physical port groups.

 

 

 

 

 

 

Ethernet

Manage Ethernet interfaces and virtual Ethernet

 

 

 

interfaces.

 

 

 

 

 

 

PPP

Create and manage PPPoE and PPTP interfaces.

 

 

 

 

 

 

Cellular

Configure a cellular Internet connection for an

 

 

 

installed 3G card.

 

 

 

 

 

 

VLAN

Create and manage VLAN interfaces and virtual

 

 

 

VLAN interfaces.

 

 

 

 

 

 

Bridge

Create and manage bridges and virtual bridge

 

 

 

interfaces.

 

 

 

 

 

 

Auxiliary

Manage the AUX port.

 

 

 

 

 

 

Trunk

Create and manage trunks for load balancing and

 

 

 

link HA.

 

 

 

 

 

Routing

Policy Route

Create and manage routing policies.

 

 

 

 

 

 

Static Route

Create and manage IP static routing information.

 

 

 

 

 

 

RIP

Configure device-level RIP settings.

 

 

 

 

 

 

OSPF

Configure device-level OSPF settings, including

 

 

 

areas and virtual links.

 

 

 

 

 

Zone

 

Configure zones used to define various policies.

 

 

 

 

 

DDNS

Profile

Define and manage the ZyWALL’s DDNS domain

 

 

 

names.

 

 

 

 

 

NAT

 

Set up and manage port forwarding rules.

 

 

 

 

 

HTTP Redirect

 

Set up and manage HTTP redirection rules.

 

 

 

 

 

ALG

 

Configure SIP, H.323, and FTP pass-through

 

 

 

settings.

 

 

 

 

 

IP/MAC

Summary

Configure IP to MAC address bindings for devices

 

Binding

 

connected to each supported interface.

 

 

 

 

 

 

Exempt List

Configure ranges of IP addresses to which the

 

 

 

ZyWALL does not apply IP/MAC binding.

 

 

 

 

 

Auth. Policy

 

Define rules to force user authentication.

 

 

 

 

 

Firewall

Firewall

Create and manage level-3 traffic rules.

 

 

 

 

 

 

Session Limit

Limit the number of concurrent client NAT/firewall

 

 

 

sessions.

 

 

 

 

 

VPN

 

 

 

 

 

 

 

IPSec VPN

VPN Connection

Configure IPSec tunnels.

 

 

 

 

 

 

VPN Gateway

Configure IKE tunnels.

 

 

 

 

 

 

Concentrator

Configure VPN concentrators (hub-and-spoke

 

 

 

VPN).

 

 

 

 

 

SSL VPN

Access Privilege

Configure SSL VPN access rights for users and

 

 

 

groups.

 

 

 

 

 

 

Global Setting

Configure the ZyWALL’s SSL VPN settings that

 

 

 

apply to all connections.

 

 

 

 

 

57

ZyWALL USG 2000 User’s Guide