Appendix A Log Descriptions

 

Table 284 Interface Logs (continued)

 

LOG MESSAGE

DESCRIPTION

 

 

Interface %s is

An administrator enabled an interface. %s: interface name.

 

 

enabled.

 

 

 

 

 

 

 

Interface %s is

An administrator disabled an interface. %s: interface name.

 

 

disabled.

 

 

 

 

 

 

 

%s MTU > (%s MTU - 8),

An administrator configured a PPP interface, PPP interface

 

 

%s may not work

MTU > (base interface MTU - 8), PPP interface may not run

 

 

correctly.

correctly because PPP packets will be fragmented by base

 

 

 

interface and the peer will not receive correct PPP packets.

 

 

 

1st %s: PPP interface name, 2nd %s: ethernet interface

 

 

 

name.

 

 

 

 

 

 

(%s MTU - 8) < %s MTU,

An administrator configured ethernet, vlan or bridge and this

 

 

%s may not work

interface is base interface of PPP interface. PPP interface MTU

 

 

correctly.

> (base interface MTU - 8), PPP interface may not run

 

 

 

correctly because PPP packets will be fragmented by base

 

 

 

interface and peer will not receive correct PPP packets.1st

 

 

 

%s: Ethernet interface name, 2nd %s: PPP interface name.

 

 

 

 

 

 

Interface %s links

An administrator set a static gateway in interface but this

 

 

down. Default route

interface is link down. At this time the configuration will be

 

 

will not apply until

saved but route will not take effect until the link becomes

 

 

interface %s links up.

up.1st %s: interface name, 2nd %s: interface name.

 

 

 

 

 

 

name=%s,status=%s,TxP

Port statistics log. This log will be sent to the VRPT server.

 

 

kts=%u,

1st %s: physical port name, 2nd %s: physical port status, 1st

 

 

RxPkts=%u,Colli.=%u,T

 

 

%u: physical port Tx packets, 2nd %u: physical port Rx

 

 

xB/s=%u,

 

 

packets, 3rd %u: physical port packets collisions, 4th %u:

 

 

RxB/s=%u,UpTime=%s

 

 

physical port Tx Bytes/s, 5th %u: physical port Rx Bytes/s,

 

 

 

 

 

 

3rd %s: physical port up time.

 

 

 

 

 

 

name=%s,status=%s,TxP

Interface statistics log. This log will be sent to the VRPT

 

 

kts=%u,

server.

 

 

RxPkts=%u,Colli.=%u,T

1st %s: interface name, 2nd %s: interface status, 1st %u

 

 

xB/s=%u,

 

 

variable: interface Tx packets, 2nd %u variable: interface Rx

 

 

RxB/s=%u

 

 

packets, 3rd %u: interface packets collisions, 4th %u:

 

 

 

 

 

 

interface Tx Bytes/s, 5th %u: interface Rx Bytes/s.

 

 

 

 

 

 

Interface %s start

A PPP or aux interface started dialing to a server. %s:

 

 

dailing.

interface name.

 

 

 

 

 

 

Interface %s connect

A PPTP interface failed to connect to the PPTP server. %s:

 

 

failed: Connect to

interface name.

 

 

server failed.

 

 

 

 

 

 

 

Interface %s

A PPP or AUX connection will terminate. %s: interface name.

 

 

connection

 

 

 

terminated.

 

 

 

 

 

 

 

Interface %s

An idle PPP or AUX connection timed out.1%s: interface

 

 

connection

name.

 

 

terminated: idle

 

 

 

timeout.

 

 

 

 

 

 

 

Interface %s connect

MS-CHAPv2 authentication failed (the server must support

 

 

failed: MS-CHAPv2

mS-CHAPv2 and verify that the authentication failed, this

 

 

mutual authentication

does not include cases where the servers does not support

 

 

failed.

MS-CHAPv2). %s: interface name.

 

 

 

 

 

 

951

ZyWALL USG 2000 User’s Guide