Chapter 1 Introducing the ZyWALL

1Insert the transceiver into the slot with the exposed section of PCB board facing down.

Figure 4 Transceiver Installation Example

2Press the transceiver firmly until it clicks into place.

Figure 5 Installed Transceiver

3Push the end of the fiber-optic cable firmly into the transceiver until it locks into place. When the other end of the fiber-optic cable is connected, check the LEDs to verify the link status.

Figure 6 Installing the Fiber-optic Cable

Fiber-optic Cable and Transceiver Removal

Use the following steps to remove a mini GBIC transceiver (SFP module).

 

37

ZyWALL USG 2000 User’s Guide