Chapter 8 L2TP VPN Example

Configure the My Address setting. This example uses interface ge2 with static IP address 172.16.1.2.

Note: If it is possible that the remote user’s public IP address could be in the same subnet as the specified My Address, click Configure > Network > Routing > Policy Route > Show Advanced Settings and select Use Policy Route to Override Direct Route.

Select Pre-Shared Key and configure a password. This example uses top- secret. Click OK.

Figure 136 Configuration > VPN > IPSec VPN > VPN Gateway > Edit

2Select the Default_L2TP_VPN_GW entry and click Activate and click Apply to turn on the entry.

Figure 137 Configuration > VPN > IPSec VPN > VPN Gateway (Enable)

172

 

ZyWALL USG 2000 User’s Guide