ZyXEL Communications USG 2000 7.11.3 Set Up a Firewall Rule

Chapter 7 Tutorials

•Keep Enable NAT Loopback selected to allow users connected to other interfaces to access the HTTP server (see NAT Loopback on page 393 for details).

Figure 116 Creating the NAT Entry

7.11.3 Set Up a Firewall Rule

The firewall blocks traffic from the WAN zone to the DMZ zone by default so you need to create a firewall rule to allow the public to send HTTP traffic to IP address

1.1.1.1in order to access the HTTP server. If a domain name is registered for IP address 1.1.1.1, users can just go to the domain name to access the web server.

156
	ZyWALL USG 2000 User’s Guide