Chapter 8 L2TP VPN Example

3Select the Default_L2TP_VPN_Connection entry and click Activate and then Apply to turn on the entry.

Figure 139 Configuration > VPN > IPSec VPN > VPN Connection (Enable)

8.4Configuring the L2TP VPN Settings Example

1Click Configuration > VPN > L2TP VPN and configure the following.

Configure an IP address pool for the range of 192.168.10.10 to 192.168.10.20. It is called L2TP_POOL here.

Enable the connection.

Set the VPN Connection to the Default_L2TP_VPN_Connection.

Set the IP Address Pool to L2TP_POOL.

This example uses the default authentication method (the ZyWALL’s local user data base).

Select a user or group of users that can use the tunnel. Here a user account named L2TP-testhas been created.

174

 

ZyWALL USG 2000 User’s Guide