ZyXEL Communications USG 2000 manual 214

Chapter 9 Dashboard

Table 21 Dashboard (continued)

LABEL	DESCRIPTION
Action	Use this field to get or to update the IP address for the interface.
	Click Renew to send a new DHCP request to a DHCP server.
	Click the Connect icon to have the ZyWALL try to connect a PPPoE/PPTP
	interface or the auxiliary interface. If the interface cannot use one of
	these ways to get or to update its IP address, this field displays n/a.
	Click the Disconnect icon to stop a PPPoE/PPTP or auxiliary interface’s
	connection.
Extension Slot	This section of the screen displays the status of the extension card slot
	and the USB ports.
Slot	This field displays the name of each extension slot.
Device	This field displays the name of the device connected to the extension slot
	(or none if no device is detected). For an installed SEM (Security
	Extension Module) card, this field displays what kind of SEM card is
	installed.
	SEM-VPN- The VPN accelerator. The SEM-VPN provides 500 Mbps VPN
	throughput, 2,000 IPSec VPN tunnels, and 750 SSL VPN users.
	SEM-UTM- UTM accelerator. The SEM-UTM provides 400 Mbps anti-
	virus and IDP throughput.
	SEM-DUAL- accelerator for both VPN and UTM. The SEM-DUAL provides
	the benefits of both the ZyWALL-UTM and ZyWALL-VPN.
Status	For cellular (3G) interfaces, see Section 10.9 on page 239 for the status
	that can appear. For an installed SEM (Security Extension Module) card,
	this field displays one of the following:
	Active - The SEM card is working properly.
	Ready to activate - The SEM was inserted while the ZyWALL was
	operating. Restart the ZyWALL to use the SEM.
	Driver load failed - An error occurred during the ZyWALL’s attempt to
	activate the SEM card. Make sure the SEM is installed properly and the
	thumbscrews are tightened. If this status still displays, contact your
	vendor.
System Status
System	This field displays how long the ZyWALL has been running since it last
Uptime	restarted or was turned on.
Current	This field displays the current date and time in the ZyWALL. The format
Date/Time	is yyyy-mm-dd hh:mm:ss.
VPN Status	Click this to look at the VPN tunnels that are currently established. See
	Section 9.2.1 on page 216.
DHCP Table	Click this to look at the IP addresses currently assigned to the ZyWALL’s
	DHCP clients and the IP addresses reserved for specific MAC addresses.
	See Section 9.2.5 on page 219.
Current	This field displays the user name used to log in to the current session,
Login User	the amount of reauthentication time remaining, and the amount of lease
	time remaining. See Chapter 40 on page 689.

214
	ZyWALL USG 2000 User’s Guide