Chapter 7 Tutorials

2Drag physical port 5 onto representative interface ge4 and click Apply.

Figure 70 Configuration > Network > Interface > Port Grouping Example

3Click Dashboard, and look at the Interface Status Summary. Ethernet interface ge4 has a status of Port Group Up if it is connected or Port Group Down if it is not connected. Ethernet interfaces ge5 has a Status of Port Group Inactive.

Figure 71 Dashboard: Interface Status Summary After Port Grouping

7.2How to Configure a Cellular Interface

Use 3G cards for cellular WAN (Internet) connections. Table 256 on page 891 lists the compatible 3G devices. In this example you install or connect the 3G card before you configure the cellular interfaces but is also possible to reverse the sequence.

1Make sure the 3G device’s SIM card is installed.

2Install the 3G device in the ZyWALL’s PCIMCIA slot or connect it to one of the ZyWALL’s USB ports.

122

 

ZyWALL USG 2000 User’s Guide