Chapter 7 Tutorials

1Click Configuration > Firewall > Add. Set the From field as DMZ and the To field as LAN. Set the Destination to the IPPBX’s DMZ IP address object (DMZ_SIP). Set the Source to IPPBX_DMZ. Leave the Access field to allow and click OK.

Figure 124 Configuration > Firewall > Add

7.13How to Use Multiple Static Public WAN IP Addresses for LAN to WAN Traffic

If your ISP gave you a range of static public IP addresses, here is how to configure a policy route to have the ZyWALL use them for traffic it sends out from the LAN.

7.13.1 Create the Public IP Address Range Object

Click Configuration > Object > Address > Add to create the address object that represents the range of static public IP addresses. In this example you name it Public-IPs and it goes from 1.1.1.10 to 1.1.1.17.

Figure 125 Creating the Public IP Address Range Object

 

163

ZyWALL USG 2000 User’s Guide