Chapter 13 Interfaces

Figure 263 Configuration > Network > Interface > Auxiliary

Each field is described in the table below.

Table 73 Configuration > Network > Interface > Auxiliary

LABEL

DESCRIPTION

General Settings

 

 

 

Enable

Select this to turn on the auxiliary dial up interface. The interface

Interface

does not dial out, however, unless it is part of a trunk and load-

 

balancing conditions are satisfied.

 

 

Interface

 

Properties

 

 

 

Zone

This field is read-only and displays the zone to which the auxiliary

 

interface belongs.

 

 

Description

Enter a description of this interface. It is not used elsewhere. You can

 

use alphanumeric and ()+/:=?!*#@$_%- characters, and it can be

 

up to 60 characters long.

 

 

Port Speed

Select the speed of the connection between the ZyWALL and external

 

computer.

 

 

Dialing Type

Tone - select this if the telephone uses tone-based dialing.

 

Pulse - select this if the telephone uses pulse-based dialing.

 

 

Initial String

Enter the AT command string to initialize the external modem. ATZ is

 

the most common string, but you should check the manual for the

 

external modem for additional commands.

 

 

Auxiliary

 

Configuration

 

 

 

328

 

ZyWALL USG 2000 User’s Guide