ZyXEL Communications USG 2000 manual 225

Chapter 10 Monitor

The following table describes the labels in this screen.

Table 28 Monitor > System Status > Port Statistics

LABEL	DESCRIPTION
Poll Interval	Enter how often you want this window to be updated automatically, and
	click Set Interval.
Set Interval	Click this to set the Poll Interval the screen uses.
Stop	Click this to stop the window from updating automatically. You can start
	it again by setting the Poll Interval and clicking Set Interval.
Switch to	Click this to display the port statistics as a line graph.
Graphic View
#	This field displays the port’s number in the list.
Port	This field displays the physical port number.
Status	This field displays the current status of the physical port.
	Down - The physical port is not connected.
	Speed / Duplex - The physical port is connected. This field displays the
	port speed and duplex setting (Full or Half).
TxPkts	This field displays the number of packets transmitted from the ZyWALL
	on the physical port since it was last connected.
RxPkts	This field displays the number of packets received by the ZyWALL on the
	physical port since it was last connected.
Collisions	This field displays the number of collisions on the physical port since it
	was last connected.
Tx B/s	This field displays the transmission speed, in bytes per second, on the
	physical port in the one-second interval before the screen updated.
Rx B/s	This field displays the reception speed, in bytes per second, on the
	physical port in the one-second interval before the screen updated.
Up Time	This field displays how long the physical port has been connected.
System Up	This field displays how long the ZyWALL has been running since it last
Time	restarted or was turned on.

	225
ZyWALL USG 2000 User’s Guide