ZyXEL Communications USG 2000 715

Chapter 42 Services

To access this screen, log in to the Web Configurator, and click Configuration > Object > Service > Service Group.

Figure 475 Configuration > Object > Service > Service Group

The following table describes the labels in this screen. See Section 42.3.1 on page 716 for more information as well.

Table 198 Configuration > Object > Service > Service Group

LABEL	DESCRIPTION
Add	Click this to create a new entry.

Edit	Double-click an entry or select it and click Edit to be able to modify the
	entry’s settings.

Remove	To remove an entry, select it and click Remove. The ZyWALL confirms
	you want to remove it before doing so.

Object	Select an entry and click Object References to open a screen that
References	shows which settings use the entry. See Section 13.3.2 on page 291 for
	an example.

#	This field is a sequential value, and it is not associated with a specific
	service group.

Name	This field displays the name of each service group.
	By default, the ZyWALL uses services starting with “Default_Allow_” in
	the firewall rules to allow certain services to connect to the ZyWALL.

Description	This field displays the description of each service group, if any.