Chapter 39 Device HA

Table 182 Configuration > Device HA > Legacy Mode > Add (continued)

LABEL

DESCRIPTION

VRID

Type the virtual router ID number.

 

 

Virtual Router

This is the interface’s IP address and subnet mask in the virtual router.

IP (VRIP) /

 

Subnet Mask

 

 

 

Authentication

Select the authentication method used in the virtual router. Every

 

interface in a virtual router must use the same authentication method

 

and password. Choices are:

 

None - this virtual router does not use any authentication method.

 

Text - this virtual router uses a plain text password for authentication.

 

Type the password in the field next to the radio button. The password

 

can consist of alphanumeric characters, the underscore, and some

 

punctuation marks (+-/*= :; .! @$&%#~ ‘ \ () ), and it can be up to

 

eight characters long.

 

IP AH (MD5) - this virtual router uses an encrypted MD5 password for

 

authentication. Type the password in the field next to the radio button.

 

The password can consist of alphanumeric characters, the underscore,

 

and some punctuation marks (+-/*= :; .! @$&%#~ ‘ \ () ), and it can

 

be up to eight characters long.

 

See Authentication Types on page 375 for more information about

 

authentication methods.

 

 

OK

Click OK to save your changes back to the ZyWALL.

 

 

Cancel

Click Cancel to exit this screen without saving your changes.

 

 

39.7 Device HA Technical Reference

Active-Passive Mode Device HA with Bridge Interfaces

Here are two ways to avoid a broadcast storm when you connect the bridge interfaces on two ZyWALLs.

First Option for Connecting the Bridge Interfaces on Two ZyWALLs

The first way is to activate device HA before connecting the bridge interfaces as shown in the following example.

682

 

ZyWALL USG 2000 User’s Guide