Chapter 7 Tutorials

3Set the Device Role to Master. This example focuses on the connection from the LAN (ge1) to the Internet through the ge2 interface, so select the ge1 and ge2 interfaces and click Activate. Enter a Synchronization Password (“mySyncPassword” in this example) and click Apply.

Figure 130 Configuration > Device HA > Active-Passive Mode: Master ZyWALL Example

4Click the General tab. Turn on device HA and click Apply.

Figure 131 Configuration > Device HA > General: Master ZyWALL Example

 

167

ZyWALL USG 2000 User’s Guide