ZyXEL Communications USG 2000 manual 229

	Chapter 10 Monitor
Table 30 Monitor > System Status > Interface Status (continued)
LABEL	DESCRIPTION
HA Status	This field displays the status of the interface in the virtual router.
	Active - This interface is the master interface in the virtual router.
	Stand-By- This interface is a backup interface in the virtual router.
	Fault - This VRRP group is not functioning in the virtual router right now.
	For example, this might happen if the interface is down.
	n/a - Device HA is not active on the interface.
Zone	This field displays the zone to which the interface is assigned.
IP Addr/	This field displays the current IP address and subnet mask assigned to
Netmask	the interface. If the IP address and subnet mask are 0.0.0.0, the
	interface is disabled or did not receive an IP address and subnet mask
	via DHCP.
	If this interface is a member of an active virtual router, this field displays
	the IP address it is currently using. This is either the static IP address of
	the interface (if it is the master) or the management IP address (if it is a
	backup).
IP Assignment	This field displays how the interface gets its IP address.
	Static - This interface has a static IP address.
	DHCP Client - This interface gets its IP address from a DHCP server.
	Dynamic - This is the auxiliary interface.
Services	This field lists which services the interface provides to the network.
	Examples include DHCP relay, DHCP server, DDNS, RIP, and OSPF.
	This field displays n/a if the interface does not provide any services to
	the network.
Action	Use this field to get or to update the IP address for the interface. Click
	Renew to send a new DHCP request to a DHCP server. Click Connect to
	try to connect the auxiliary interface or a PPPoE/PPTP interface. If the
	interface cannot use one of these ways to get or to update its IP
	address, this field displays n/a.
Interface	This table provides packet statistics for each interface.
Statistics
Refresh	Click this button to update the information in the screen.
Expand/Close	Click this button to show or hide statistics for all the virtual interfaces on
	top of the Ethernet interfaces.
Name	This field displays the name of each interface. If there is a Expand icon
	(plus-sign) next to the name, click this to look at the statistics for
	virtual interfaces on top of this interface.
Status	This field displays the current status of the interface.
	Down - The interface is not connected.
	Speed / Duplex - The interface is connected. This field displays the
	port speed and duplex setting (Full or Half).
TxPkts	This field displays the number of packets transmitted from the ZyWALL
	on the interface since it was last connected.

	229
ZyWALL USG 2000 User’s Guide