ZyXEL Communications USG 2000 13.3.2 Object References

	Chapter 13 Interfaces
Table 59 Configuration > Network > Interface > Ethernet > Edit (continued)
LABEL	DESCRIPTION
Text	This field is available if the Authentication is Text. Type the
Authentication	password for text authentication. The key can consist of alphanumeric
Key	characters and the underscore, and it can be up to eight characters
	long.
MD5	This field is available if the Authentication is MD5. Type the ID for
Authentication	MD5 authentication. The ID can be between 1 and 255.
ID
MD5	This field is available if the Authentication is MD5. Type the
Authentication	password for MD5 authentication. The password can consist of
Key	alphanumeric characters and the underscore, and it can be up to 16
	characters long.
MAC Address	This section appears when Interface Properties is External or
Setting	General. Have the interface use either the factory assigned default
	MAC address, a manually specified MAC address, or clone the MAC
	address of another device or computer.
Use Default	Select this option to have the interface use the factory assigned
MAC Address	default MAC address. By default, the ZyWALL uses the factory
	assigned MAC address to identify itself.
Overwrite	Select this option to have the interface use a different MAC address.
Default MAC	Either enter the MAC address in the fields or click Clone by host and
Address	enter the IP address of the device or computer whose MAC you are
	cloning. Once it is successfully configured, the address will be copied
	to the configuration file. It will not change unless you change the
	setting or upload a different configuration file.
Related Setting
Configure	Click PPPoE/PPTP if this interface’s Internet connection uses PPPoE
PPPoE/PPTP	or PPTP.
Configure	Click VLAN if you want to configure a VLAN interface for this Ethernet
VLAN	interface.
Configure	Click WAN TRUNK to go to a screen where you can set this interface
WAN TRUNK	to be part of a WAN trunk for load balancing.
Configure	Click Policy Route to go to the policy route summary screen where
Policy Route	you can manually associate traffic with this interface.
	You must manually configure a policy route to add routing and SNAT
	settings for an interface with the Interface Type set to General. You
	can also configure a policy route to override the default routing and
	SNAT behavior for an interface with an Interface Type of Internal
	or External.
OK	Click OK to save your changes back to the ZyWALL.
Cancel	Click Cancel to exit this screen without saving.

13.3.2 Object References

When a configuration screen includes an Object References icon, select a configuration object and click Object References to open the Object References screen. This screen displays which configuration settings reference the selected object. The fields shown vary with the type of object.

	291
ZyWALL USG 2000 User’s Guide